Description
The MaxColor 4K60 Receiver natively supports 4K60 input, allowing you to distribute 4K UHD video from the growing number of 4K sources with no downscaling or subsampling. With MaxColor, 4K60 4:4:4 12 Bit Video can be distributed over a 1Gb managed network using Cat5E or Cat6, eliminating the need to upgrade to fiber or 10 gigabit network switches. HDR10, HDR10+, HLG and Dolby Vision are all supported. All lossless audio formats are accepted however they must be set to stereo if you wish to use the built in analog outputs.
IR and RS232 output is built in and can be controlled by most control systems. This enables you to control the display or another device via the automation system.
Note: This only works with the MC series transmitter and receivers.
overview
- Supports all audio formats
- Supports deep color up to 36-bit
- HDR, HDR10, HDR10+, HLG and Dolby Vision
- Control endpoints with CEC, IR, RS232
- View a live MJPEG stream up to 30fps
- View a snapshot image in any web browser or control system, at up to 10 fps
- Display a custom logo or message as an overlay on any active screen
- Load a custom default image or logo for when no source is displayed onscreen
- Video wall support w/ Rotation
- Computer and video resolution 4K/60 @ 4:4:4
- Supports Audio Return Channel (ARC)
Bandwidth
850 Mbps
Power Supply (not included)
5V-18V, 10W
5.5mm/2.1mm, positive tip
Compliance
FCC/CE/ROHS Compliant
Ports
RJ45 (1GbE Gigabit Ethernet LAN)
HDMI (Input-TX, RX-Output)
3-pin Euroblock Stereo Out
3-pin Euroblock IR Out
3-pin Euroblock 2-Way RS232
Encryption
AES256 Hardware Based Crypto Engine
HDCP 2.2
Operating Temp
0-60 °C / 32-140 °F
POE
IEEE 802.3af (15.4W)
Supported Audio & Video
Audio: All Audio Formats
Video: Up to 4K60 with 36-bit color
YCbCr444/422/420, RGB444, ICtCp444
HDR10, HDR10+, HLG, Dolby Vision, SDR
#gap-642378633 {
padding-top: 50px;
}
More from Just Add Power:
Reviews
There are no reviews yet.